Transfer pressure Kit
Kit to determine if the ZME valve can be retained, instead of installing a new one, on CP4 pumps.
Bussola 1/2 per Torx 50
Torx bit
Similar to 0 986 613 145
Disassembly key
15 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Similar to 1 680 712 324
Estrattore per CP1
Extraction tool for the cap on the rod-type filter on common rail high-pressure pump CP1H with gear pump.
Similar to 0 986 613 165
Extractor tool for the filter cap on CP1H common rail high pressure pumps equipped with gear pump.
Similar to Bosch 0 986 613 162.
Additional external LUBE.
*** Required if the test bench in use is not equipped with a lubricating system.
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
By-pass kit
Return by-pass set on CP2 / HP0 pumps
Test kit
transfer pressure test kit with 16 BAR pressure gauge (pressure gauge not included)