Categories

Hexagonal open insert for torque wrench
27 mm hexagonal open wrench, 14 x 18 mm connection.
Micron measuring station
Micron measuring station with digital reading. 0-25 mm range.
Ball lift relief tool
High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.
Comparator support
Holder for millesimal gauge with 70 mm diameter round top. Made in hardened, ground and lapped steel.
Inserter
Sliding inserter for ring and seal of common rail injectors
Box of calibrating shims and tools
Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)
Allen wrench
Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 7,5 mm hole
9700-CR Cassetta lappatura iniettori common rail
Toolset for the manual grinding and lapping of the ball seat on Bosch CRI and CRIN valves.
29 mm hexagon socket
29 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut.
Similar to 0 986 613 633
Compact pneumatic press for CRI and CRIN ball valves
Tool to recover the tightness of the ball valve of CRI and CRIN common rail injectors.
It is not a grinding operation to remove hardened metal from the conical seat: the principal is to keep the treatment of the conical surface and compact its molecoles by a strong shot on a geometrically accurate sphere made of hard metal.
A set of 10 pcs of these balls is provided with the machine.
Each ball can be used for 100 shots and have not to be confused with the balls normally used as spare part.
Allen wrench
Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 6,5 mm hole
ALESATORE GUIDATO CON 3 FRESE
Motoring reamer consisting of three milling cutters: plane milling cutter for nozzle holders seats Mercedes; coned milling cutter for nozzle holders Fiat Daily Ducato and plane milling cutter with large guide for Ford Transit nozzle holders seats.
Patented
320 grit paste for polishing and lapping diesel nozzles
Polishing and emery paste - grain 320
600 grit paste for polishing and lapping diesel nozzles
Polishing and emery paste - grain 600