Marbed 8210

Public / Product literature

372 views
0 Likes
0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

2. www.marbed.com © Copyright 2001-2014, Marbed (Italy). All rights reserved. Application Stamping vs grinding Easy operation The operating principle In CRI and CRIN Bosch injectors, the valve function is to cut off the fuel fl ow, allowing to control the return fuel and introduce the reque- sted quantity to the engine. This happens for a new brand valve, but the high pressure operating conditions and frequency will damage the conical surface of it. In presence of these scraps, the valve will leak and a lower fuel quan- tity is introduced into the engine combustion chamber. 8210 can be used for both applications where 1,33 or 1,34 balls are used. • To avoid leaking, the grinding operation requires to remove as much material as the scraps deep are. Necessarily, this will change the injector parameters. • Stamping is the easiest, fastest and more affordable method to recover the right function of the valve. • Grinding by the proper tool 9700-CR helps to reduce the deep of the scraps, but the job is not able to assure the seal, because free interspaces can always be there. Please refer to the diagram presenting an horizontal section of the valve. • Warning : Before stamping, it is mandatory that the conical surface is absolutely free of carbon/oxid/metallic residuals. For this reason, ultrasonic cleaning is strictly necessary. • The 8210 tool requires a compressed air supply (min 6 BAR). No electrical power supply is required. • For a reliable and accurate operations, the internal calibrated valve warrants the effective stamping. • The ball valve is secured in the proper seat. • Use one of the 10 hard steel balls (Each of these balls can stamp 1000 circles) • Lock the cover through the two handles. • Easily actuate the push-button for 5 sec. to stamp the new sealing seat. No paste is required. The operating principle of 8210 is to use a master ball made of properly hardened steel, having a perfectly calibrated spherical geometry. It is used as a matrix, in order to stamp a new contact line between the ball and the valve. • The ball hardness is stronger than the valve, so that the valve molecules are compacted for a max 2 micron deep. The minimum to warrant the seal, while preserving the injector parameters. • A new seat is generated, allowing the perfect hydraulic seal. Distribuited by: CONICAL SURFACE IRREGULAR PROFILE ON THE BALL-SEAT ORIFICE BALL CONTACT LINE FREE SPACE BETWEEN THE BALL AND ITS SEAT R E S E A L I N G T O O L RESEALING TOOL FOR THE BALL VALVE

1. R E S E A L I N G T O O L RESEALING TOOL f o r for t h e the BALL VALVE • NO ELECTRICAL POWER SUPPLY IS REQUIRED • EASY AND EFFECTIVE OPERATION • RELIABLE AND ACCURATE www.marbed.com RESEALING TOOL for the BALL VALVE on BOSCH CRI and CRIN injectors Cod. 8210 How to recondition the ball valve, on BOSCH CRI and CRIN injectors. O E V o S n O W E R D V E on the SCH jectors.

Views

  • 372 Total Views
  • 284 Website Views
  • 88 Embedded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 37 www.marbed.com